Ignik logo
Ignik logo

All articles

How do I transport and store the Ignik TapRack and bottles safely?Updated 24 days ago

Propane is a pressurized, flammable fuel, so safe handling matters. Below are practical, beginner-friendly best practices for transporting and storing your TapRack and Ignik 15.5 oz refillable bottles.


Transport basics (car, SUV, truck, RV)

  • Keep everything upright and secured so it can’t tip, slide, or roll.

  • Use a well-ventilated vehicle whenever possible. An open truck bed or open trailer is ideal (but not required).

  • If transporting inside a car/SUV, ventilate (crack windows) when possible —don’t leave propane in a closed vehicle for a prolonged time.

  • Keep propane away from heat, direct sun, sparks, and open flame.


Best long-term storage practice

For long-term storage, the best method is to remove the bottles from the TapRack.
This reduces unnecessary stress/fatigue on the TapRack/bottle valve connection over time and is the safest “set it and forget it” approach.

Long-term storage checklist (recommended):

  • Remove bottles from the TapRack

  • Store bottles upright on a stable surface

  • Store in a well-ventilated outdoor area (not in living spaces)


Where to store (and where NOT to store)

Do store:

  • Outdoors, upright, in a well-ventilated area.

Do NOT store:

  • Inside your home or other enclosed spaces.

  • In a vehicle (especially closed up or on hot days).


TapRack-specific tips

  • If you leave bottles on the TapRack while traveling, remember: bottles connected on the rack can equalize pressure (especially if some are full and some are empty/low). For the most predictable fuel levels, avoid storing the rack long-term with mixed fill levels mounted together.

  • Keep the TapRack upright and protected from being knocked around.


Quick safety checks before/after travel

  • If anything was bumped, dropped, or reattached, do a quick soap-and-water leak check before use.

  • If you ever smell propane strongly: stop, move away from ignition sources, and don’t use the system until you’ve identified the issue. 

Was this article helpful?
Yes
No