Ignik logo
Ignik logo

All articles

The TapRack

How do I refill the TapRack and Pounder?

TAPRACK QUICK START GUIDEFill up to 4 – Ignik Pounder bottles at once using the TapRack filling frame. TapRack filling frame is only compatible with Ignik Pounder bottles.The TapRack filling frame is required to fill Pounder bottles. 1. Connect Pound

If only some of my bottles are empty, but not all, can I still get them filled?

Yes! Even if you only have a few empty bottles, you can still attach them to the tap tack and have them filled without having to worry about your already full bottles overfilling.

Can I use the Taprack with a FireCan?

Yes, you can connect to the TapRack to use multiple pounder bottles at once, harnessing more heating power to be used with appliances like firepits that require a larger propane source.

Can I attach other 1lb bottles to the TapRack and refill them?

Not only is it unsafe and illegal to attempt to refill single use 1lb bottles, you cannot connect any other propane bottles to the TapRack outside of the Ignik Pounders due to our quarter turn connector on the TapRack valves. This also means the TapR

What can I use the Pounder bottles with?

Ignik pounder bottles are gas cylinders with a standard valve and 1”-20UNEF thread on the top of the bottle. They provide fuel for camping stoves, lanterns & heaters that use the typical 1lb single use green bottles that we are accustomed to.

When I place an empty bottle back on the Taprack, the other bottles lose pressure. Is this normal?

All bottles are connected when they are on the Taprack, so some pressure will go out from a full bottle to an empty bottle, equalizing the pressure between them. For this reason, once a bottle is emptied, we do not recommend placing it back on the Ta